Adding Reactivation Salt - Miele G 8072 Operating Instructions Manual

Adding reactivation salt

,
Only put reactivation salt in the
salt dispenser. Inadvertently filling
the salt reservoir with cleaning agent
will damage the water softener.
Before filling the salt reservoir make
sure that you have selected
reactivation salt to put in it!
,
Please only use special coarse
grained reactivation salt with
granules of approx. 1-4 mm. Do not
use other types of salt, e.g. table
salt, agricultural or gritting salt.
These could contain components
which are insoluble in water which
could result in damage to the water
softener. If in doubt consult the Miele
Professional Department.
^ Remove the basket from the
machine.
^ Remove the basket carrier from the
machine.
^ Unscrew the salt reservoir cap.
^ Fill the salt reservoir to the brim with
fresh water (only necessary the first
time of using).
^ Place the funnel provided in place.
^ Fill carefully with 1.5 kg of
reactivation salt. As it is filled
displaced water will run out.
^ Remove the funnel.
^ Wipe any residual salt off the screw
threads on the socket.
^ Screw the cap back onto the salt
reservoir - do not overtighten.
^ Re-fit the basket carrier and
^ the basket.
^ Run the self-cleaning programme Ä
immediately to rinse out any residual
salt.
Water softener
19