Metering Mode - Sony DSC-RX100M3 How To Use Manual

(exposure compensation). Normally, exposure is set automatically (auto exposure).
(Exposure Comp.) on the control wheel → press the left/right side of the
1. /
control wheel or turn the control wheel, and select the desired exposure range.
You can adjust the exposure in a range of –3.0 EV to +3.0 EV.
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash,
you may not be able to get a satisfactory effect.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO]
is set to [ISO AUTO].
[71] How to Use Using shooting functions

Metering Mode

Selects the metering mode that sets which part of the screen to measure for determining the
exposure.
1. MENU →
Menu item details
Multi (default setting):
Measures light on each area after dividing the total area into multiple areas and determines
the proper exposure of the entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the central area of
the screen (Center-weighted metering).
Spot:
Measures only the central area (Spot metering). This function is useful when the subject is
backlit or when there is strong contrast between the subject and the background.
Note
[Multi] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
Zoom functions other than optical zoom
(Camera Settings) → [Metering Mode] → desired setting.
Adjusting the exposure