Connection - Labgear HDSR300 User Manual

Make sure to check the power specification before connecting your receiver
to the wall outlet.

1.3 Connection

Note: Before connect this HD receiver to other devices, please shut down all
devices to be connected.
Connecting to TV
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the receiver to your TV set through the options of HDMI cable, SCART cable
or a RCA cable.
Connecting to Digital Audio Amplifier
Connect S/PDIF connector at the back of your receiver to appropriated input of your
Digital Audio
Connecting to Dish
Aiming a satellite dish and LNB to the correct longitude and Azimuth (angle of elevation)
of a satellite is a specialist job, and best to be done by a professional installer.
<Connecting a fixed satellite dish to your receiver>
Make your choice of which satellite you want to receive your signals from, and have your
installer aim your dish at the requested satellite. For English language channels this will
be Astra 2, Eurobird 1.
Connect an F type coax cable to your LNB and the other end directly to the LNB IN
connector of your receiver.
5