Antenne Setup; Single Satellite Search; Multi Satellite Search - Labgear HDSR300 User Manual

Rename
Press UP or DOWN button to select one satellite,
press RED button to enter "Edit Satellite" menu,
press numeric key to input the new name.
Add
Press GREEN button to add new satellite.
Delete
Press BLUE button to delete selected satellite.

4.3 Antenne Setup

From "Installation" menu, press OK button on
the Antenna Setup, you will get this window.
Satellite: If you press OK in Satellite, the
satellites list is displayed. Move the cursor to a
satellite and press OK to select the satellite
LNB Freq: Here you can change LNB Frequency.
Default is set to 'Universal (9750-10600).
Transponder: To change the transponder.
DiSEqC1.0: Default is Disable. You can select Port1~Port4.
22K: Default is Auto.
Polarity: You can change the Polarity. Default is
Auto

4.4 Single Satellite Search

In this menu, you can select one satellite and set
FTA Only (Yes or No), Scan Channel (TV
Channel, Radio, or TV+Radio), Network Search
(Default), and Scan Mode (Auto or Preset) to
search channels only on the select satellite. English language channels set to Astra 2,
Eurobird 1.

4.5 Multi Satellite Search

In this menu, you can set FTA Only, Scan
Channel and Scan Mode to search channels on
multi-satellite.
11