Yamaha YZF-R1(P) 2002 Service Information page 42

NO. ITEM
Chassis fasteners
15 *
(See page 2-21)
Sidestand
16
(See page 3-62)
Sidestand switch
17 *
(See page 8-4)
Front fork
18 *
(See page 3-53)
Shock absorber
19 *
assembly
(See page 4-68)
Rear suspension relay
arm and connecting
20 *
arm pivoting points
(See page 4-72)
Electronic fuel
21 * injection system
(See page 3-14)
Engine oil
22
(See page 3-28)
Engine oil filter
23
cartridge
(See page 3-29)
Cooling system g y
24 * 24 *
(See page 3-38)
Front and rear brake
switches
25 *
(See page 3-45)
(See page 8-4)
Moving parts and
26
cables
(See page 3-62)
Throttle grip housing
27 * and cable
(See page 3-22)
Air induction system
28 *
(See page 7-39)
Muffler and exhaust
29 * pipe.
(See page 3-35)
Lights, signals and
30 * switches
(See page 3-71)
NOTE:
D Air filter
S This model's air filter is equipped with a disposable oil-coated paper element, which must not be
cleaned with compressed air to avoid damaging it.
S The air filter element needs to be replaced more frequently when riding in unusually wet or dusty
areas.
D Hydraulic brake service
S Regularly check and, if necessary, correct the brake fluid level.
S Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
S Replace the brake hoses every four years and if cracked or damaged.
PERIODIC MAINTENANCE AND
LUBRICATION INTERVALS
CHECK OR MAINTENANCE JOB
S Make sure that all nuts, bolts and screws are properly
tightened.
S Check operation.
S Lubricate.
S Check operation.
S Check operation and for oil leakage.
S Check operation and shock absorber for oil leakage.
S Check operation.
S Adjust engine idling speed and synchronization
S Change.
S Check oil level and vehicle for oil leakage.
S Replace.
S Check coolant level and vehicle for coolant leakage.
S Change.
S Check operation.
S Lubricate.
S Check operation and free play
S Adjust the throttle cable free play if necessary.
S Lubricate the throttle grip housing and cable.
S Check the air cut-off valve, and hose for damage.
S Replace the entire air induction system if necessary.
S Check the screw clamp for looseness.
S Check operation.
S Adjust headlight beam.
37
1
3-2
CHK
ADJ
ODOMETER READING
ANNUAL
( 1,000 km)
CHECK
CHECK
10 20 30 40
Every 3 years