Classic Series Custom Panels - KitchenAid Overlay Series KSSO36FTX Installation Manual

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (±) ¹⁄₁₆" (1.5 mm) tolerance.
Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If
panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top grille panel should not weigh more than 10 lbs (4.5 kg).
A
Model A
36
42
48
Door Panels for Non-dispenser Models
The freezer panel should not weigh more than 40 lbs (18.1 kg).
The refrigerator panel should not weigh more than 50 lbs (23 kg).
A
70
(179.1 cm)
Model A
36 14¹⁄₄" (36.2 cm)
42 16³⁄₄" (42.6 cm)
48 19¹⁄₄" (48.9 cm)

Classic Series Custom Panels

7"
(17.8 cm)
34¹⁄₄" (87.0 cm)
40¹⁄₄" (102.2 cm)
46¹⁄₄" (117.5 cm)
B
¹⁄₂
"
B
19¹⁄₄" (48.9 cm)
22³⁄₄" (57.8 cm)
26¹⁄₄" (66.7 cm)
Door Panels for Dispenser Models
The freezer panel should not weigh more than 40 lbs (18.1 kg).
The refrigerator panel should not weigh more than 50 lbs (23 kg).
NOTE: Dispenser cut-out is centered left-to-right.
A
⁷⁄₈
10 "
(27.6 cm)
¹⁄₄
14 "
(36.2 cm)
³⁄₄
33 "
(85.7 cm)
Model A
36 14¹⁄₄" (36.2 cm)
42 16³⁄₄" (42.6 cm)
48 19¹⁄₄" (48.9 cm)
Top Grille Panel – Routing Requirements
If the custom panels are thicker than ¹⁄₄" (6.35 mm), the top and
bottom edges of the top panel should be edge routed ¹⁄₂" (1.3 cm)
and ³⁄₈" (9.5 mm), respectively. Both ends should be edge routed
⁷⁄₈" (2.2 cm) as shown.
34
¹⁄₄
"
(6.35 mm)
Top
max.
Grille
¹⁄₄
"
(6.35 mm)
B
⁷⁄₁₆
70
(179 cm)
B
19¹⁄₄" (48.9 cm)
22³⁄₄" (57.8 cm)
26¹⁄₄" (66.7 cm)
¹⁄₈
" (86.68 cm)
Top
Grille
¹⁄₄
"
(6.35 mm)
"
¹⁄₄
"
(6.35 mm)
max.
15