Table of Contents
Advertisement
Available languages
Available languages
Automotive uses include reducing set up
time on body fillers or drying time on paints
(the product manufacturerʼs
recommendations must be followed.)
Caution must be exercised around
gasoline, automotive fluids, tires, gaskets,
upholstery and hoses, etc. to prevent
damage or fires. Be constantly aware that
this tool can ignite flammable materials
and soften or melt others. Avoid
overheating adjacent flammable materials
such as wood, insulation, electrical wiring
jackets or plastic. Thaw only those metal
pipe sections that are fully exposed. Do
not attempt to thaw pipes that are inside
walls, floors, ceilings, or otherwise
enclosed. Do not attempt to thaw pipes
that are wrapped in insulation.
ACCESSORIES
WARNING: The use of any accessory
not recommended for use with this tool could be hazardous. Always unplug the tool before
attaching or removing accessories. Do not remove accessory tips until the tool has cooled
to room temperature.
The following attachments are included with the PC1500HGA Heat Gun.
FAN NOZZLE
Wider distribution of the hot air, for working on
large surfaces- floors, doors, etc.
GLASS PROTECTOR
Safer working near glass. Distributes heat away
from area to be protected.
CONE NOZZLE
For precise operations- concentrates the air onto a
smaller surface area.
SPOOL REFLECTOR
Evenly dispenses air around whole object. Ideal for
soldering pipework, shrink sealing electrical cable.
CAUTION: These nozzles remain hot after use. Use care in handling them.
E
8
Advertisement
Table of Contents
