8. When Moving the Unit
Procedures from Preparing to Move Through Reinstalling
To move the machine, you must completely drain all ink inside the machine and secure the print heads in
place with packing materials to protect them. Attempting to move the machine without first doing this may
result in damage to internal components due to leaking ink or damage to the heads.
This task requires the following items. Prepare them before starting the task.
New dedicated cleaning cartridge (ESL4-CL) for ECO-SOL MAX2: 8 pieces
Contact your authorized Roland DG Corp. dealer or us for purchasing them.
Important Notes on Moving
Be sure to use new dedicated cleaning cartridges (ESL4-CL) for ECO-SOL MAX2. Using wrong
cartridges may cause of trouble.
Once the preparations for moving are complete, move the machine and fill it with ink with as
little delay as possible. Allowing the machine to stand without ink may damage the heads.
When moving the machine, keep it at a temperature between 5 to 40°C (41 to 104°F) and at
relative humidity between 20 to 80% (with no condensation). Failure to do so may result in
breakdown.
Handle the machine with care when moving, keeping it level (not tilted at an angle) and pre-
venting it from striking other objects.
1.
Drain the ink and wash the interior.
Press
v
MENU
SUB MENU
w
SUB MENU
INK CONTRO L
CLEANING LIQUID
IS REQUIRED
CHECK
DRAIN BOTTLE
Insert and remove respective cartridges following the on-screen instructions.
44
.
Press
Press
Press
Press
Press
Press
Make sure 8 unused cleaning cartridges (ESL4-CL) for
ECO-SOL MAX2 are at hand.
Press
Discard the discharged fluid in the drain bottle.
Be sure to discard the discharged fluid
Attach the drain bottle and press
Print head cleaning starts.
several times to display the left figure.
.
several times to display the left figure.
.
twice.
.
.
.