Graphically - Garmin GPS 152 Owner's Manual And Reference Manual

Selecting a 'Go To' Graphically
A graphical 'Go To' may be used to select one of three items from the map display: an existing
waypoint, an on-screen map item (roads, rivers, cities, navaids, etc..), or a new map point (non-map
item). If you are selecting a map item as the 'Go To' destination, the GPS 152 will automatically use
the name of the map item, but the point will not be stored in the waypoint list. See page 29 for
creating waypoints using map items. If you are selecting a new map point (non-map item) as the
'Go To' destination, the GPS 152 will automatically create or move a waypoint named 'MAP' at the
cursor position.
To activate an existing waypoint or map item as a 'Go To' from the map display:
1. Use the ARROW KEYPAD to highlight the waypoint or map item on screen and press NAV/MOB.
2. You will see 'Go To <waypoint name>', then press ENTER/MARK. You may also highlight the
waypoint or map item, press ENTER/MARK, highlight 'Go To' from options at the bottom of the
window and press ENTER/MARK.
To activate a new map point (non-map item) as a 'Go To' from the map display:
1. Use the ARROW KEYPAD to move the arrow cursor to the desired position.
2. Press NAV/MOB, you will see 'Go To MAP Point' highlighted, then press ENTER/MARK.
Reference
Going to a Destination
The waypoint or map item name
will automatically appear when high-
lighted and NAV/MOB is pressed.
'Go To MAP Point' allows you to
navigate to a spot on the map which
is not a waypoint or map item.
37