Using The Surface Units - GE JDP40 Owner's Manual

Using the surface units.

Throughout this manual, features and appearance may vary from your model.
Be sure you turn the control knob
to OFF when you finish cooking.
9" 6"
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both OFF and HI the control clicks into
position. You may hear slight clicking
sounds during cooking, indicating the
control is keeping the power level you set.
Dual Surface Unit Switch
The right front surface unit has 2 cooking
sizes to select from so you can match the size
of the unit to the size of the cookware you
are using.
To use the small (6 inch) surface unit, push
in the SMALL BURNER portion of the switch.
Indicator Lights
A HOT SURFACE indicator light will glow as
any radiant element heats up, and will
remain on until the surface is cool enough
to touch.
To use the large (9 inch) surface unit, push
in the LARGE BURNER portion of the switch.
A surface unit ON indicator light will glow
when any surface unit is on.
NOTE: The surface unit ON indicator light may glow
between the surface control settings of LO and OFF,
but there is no power to the surface units.
7