Remote Control - Sanyo PLC-XTC50L Owner's Manual

Part Names and Functions

Remote Control

STAND-BY button
Turn the projector off (p.25).
WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
SIGNAL EMISSION indicator
Light red while the laser beam is being emitted from
the laser light window or a signal is being sent from
the remote control to the projector (p.32).
LASER LIGHT window
A laser beam is emitted from here (p.32).
ON button
Turn the projector on (p.24).
INPUT 1 – 3 buttons
Select an input source (INPUT 1 – INPUT 3) (pp.34–
35).
AUTO PC button
Automatically adjusts the computer image to its
optimum setting (pp.30, 38).
FREEZE button
Freeze the picture on the screen (p.30).
14
Downloaded From projector-manual.com Sanyo Manuals
POINT ( VOLUME + / – ) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.26).
– Pan the image in Digital zoom + mode (p.47).
– Adjust the volume level (with Point
(p.29).
PRESENTATION POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (pp.32–33).
INFO. button
Display the input source information (p.30).
L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.33).
To ensure safe operation, observe the following
precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.
buttons)