Using Corporate Directory On Your Phone - Cisco 7961G-GE Phone Manual

Using Corporate Directory on Your Phone

You can use a corporate directory to place calls to coworkers.
If you want to...
Dial from a corporate
directory (while not
on another call)
Dial from a corporate
directory (while on
another call)
See if the phone line
in the directory is
busy
Tip
Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation button
on your phone to move between input fields.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SIP)
Then...
1. Choose > Corporate Directory (exact name can vary).
2. User your keypad to enter a full or partial name and press Search.
3. To dial, select the listing, or scroll to the listing and go off-hook.
1. Choose > Corporate Directory (exact name can vary).
2. User your keypad to enter a full or partial name and press Search.
3. Scroll to a listing and press Dial.
4. Choose a menu item to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• Transfer—Transfers the first party to the second and drops you
from the call. (Press Transfer again after dialing to complete the
action.)
• Conference—Creates a conference call with all parties, including
you. (Press Confrn again after dialing to complete the action.)
• EndCall—Disconnects the first call and dials the second.
Look for Busy Lamp Field (BLF) indicators. See the "Using BLF to Determine
a Line State" section on page 40.
Using Call Logs and Directories
47