Installation Requirements - KitchenAid W10216167A Installation Instructions Manual

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
■
Pliers
■ Phillips screwdriver
■
Flat-blade screwdriver
■ " and ¼" nut drivers or
hex sockets
■ Measuring tape or ruler
■
1½" hole saw bit
Parts needed
A
A. 72" (182.9 cm) flexible water supply line
B. Zip tie
C. Appropriate sized UL listed wire connectors (2)
D. Handle (if installing custom front panels)
E. Custom panel (if installing custom front panels)
†®TORX is a registered trademark of Acument Intellectual Properties, LLC
IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
■
Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
■ Install the dishwasher as specified in these instructions.
4

INSTALLATION REQUIREMENTS

■
10" adjustable wrench
■ Utility knife
■
Level
■ Electric drill
■
" drill bit
■ Security T-20 TORX
driver (if installing custom
front panels)
D
E
Location Requirements
Tools and Parts
Parts Supplied
Check that all parts are included.
A
E
®†
B
C
M
A. " UL listed strain relief
B. 1.25" hose clamp
C. Mounting bracket screws (8)
D. Unit mounting screws (4)
E. Y drain connector
F. Mounting brackets (4)
G. Drain connector spring
clamps (2)
■ Have everything you need to properly install dishwasher.
■ Keep the dishwasher and water lines leading to dishwasher
from freezing. Damage from freezing is not covered by the
warranty.
■
This dishwasher is manufactured for indoor use only.
■ Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
C
B
F
I
G
J
K
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2)
K. Toe kick trim
L. Panel fasteners (on some
models [2])
M. TORX ®† screws (on some
models [10])
D
H
L