Color Mode; Image" Menu - Epson EMP-TW20 User Manual

Configuration Menu Functions

"Image" menu

Picture Quality
Brightness *
The brightness of the images can be adjusted.
If projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.
Contrast *
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.
Color Saturation *
This adjusts the colour intensity for the images.
1
Tint *
(Adjustment is only possible when composite video
input.)
This adjusts the image tint.
Tracking
This adjusts the images if vertical stripes appear in the images.
1
Sync.
*
This adjusts the images if flickering, fuzziness or interference appear in the images.
•
Flickering and fuzziness may also appear in images when the brightness, contrast, sharpness and keystone
correction settings are adjusted.
•
Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".
Color Temp. *
The colour temperature can be selected from three settings in order to adjust the overall tint of the images.
s page 20
Skin Tone *
This adjusts the skin tones of people who appear in the images. s page 20
Sharpness *
This adjusts the image sharpness.

Color Mode

The Color Mode can be selected from six different settings in accordance with the images being projected.
s page 18
26
1
1
1
1
*
2
2
1
1
*
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.
Only displayed for component video/composite video/S-Video input
Only displayed for RGB-video/Computer input
and S-Video signals in NTSC format are being