Fagoting; Scallop; French Knots - Janome Skyline 55 Instruction Book

q
e
r
q
e
r
q
e
r
w
q
w
w

Fagoting

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
used.
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8) and press.
Pin the two edges to paper or tear away backing 0.5 cm
(3/16) apart.
q 0.5 cm (3/16)
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After nishing sewing, tear away the paper.

Scallop

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch pattern (mode 1) can also be used.
Sew scallops 1 cm (3/8) from the fabric edge.
Trim the allowance close to the stitches.
Make sure not to cut the stitches.

French Knots

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Tighten the thread tension to 5-8 when sewing.
61
MODE 1: 54
AUTO
Satin stitch foot F
5
(mode 1) (mode 2) can also be
MODE 1: 63
AUTO
Zigzag foot A
5
MODE 2: 42
5 8
Satin stitch foot F
5