Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Denon DN-770R
Summary of Contents for Denon DN-770R
-
Page 1: Please Check To Make Sure The Following Items Are Included With The Main Unit In The Carton: (1) Operating Instructions
STEREO CASSETTE TAPE DECK DN-770R OPERATING INSTRUCTIONS... -
Page 2: Connection Cords
Please, record and retain the Model name and serial number of your set shown on the rating label. Model No. DN-770R Serial No. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Read Instructions – All the safety and operating Power-Cord Protection – Power-supply cords should be instructions should be read before the applicance is routed so that they are not likely to be walked on or operated. pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience Retain Instructions –... - Page 4 NOTE ON USE Keep the set free from moisture, water, and dust. Do not let foreign objects in the set. Avoid high temperatures Allow for sufficient heat dispersion when installed on a rack. Unplug the power cord when not Do not let insecticides, benzene, and using the set for long periods of time.
-
Page 5: Table Of Contents
(1) Operating Instructions ............1 DENON proudly presents this advanced tape deck to audiophiles and music lovers as a further proof of DENON's non compromising pursuit of (2) Connection Cords ..............2 the ultimate in sound quality. The high quality performance and easy (3) Remote control box connection wire ........ -
Page 6: Names And Function Of Parts
(The "C" indicator will light up.) The DN-770R uses independent Dolby NR systems for decks A and B. Set the Dolby NR type for both decks A and B, using the deck A/B selector O to switch between the decks. -
Page 7: Cassette Tapes
Tape Transport Buttons PLAY Play Button Press to playback tape. ■ Stop Button Press to stop the tape in any mode. << Fast Rewind Button Press for fast rewind. >> Fast Forward Button Press for fast forwarding. REC/REC MUTE Rec/Rec Mute Press the REC/REC MUTE (•) button and PLAY button simultaneously to start Button recording. -
Page 8: Automatic Tape Selection
AUTOMATIC TAPE SELECTION This Stereo Cassette Deck contains an automatic tape selector which automatically selects the optimum bias and equalization for the tape in use. This is accomplished by detection of • If a tape without tape type detection holes is used, the deck will be set for the tape type detections holes in the cassette housing. -
Page 9: Relay Play
With the DN-770R, it is possible to play tapes simultaneously on decks A and B and The deck will rewind the tape to the beginning of the current selection and output their signals at the same time. -
Page 10: Recording
RECORDING The operations described below apply to deck A and deck B alike. Switch on your amplifier or receiver and the source component. Set the Tape Monitor switch on your amplifier or receiver to the SOURCE position. • PROPER RECORDING LEVEL Press the POWER switch to the ON position. -
Page 11: Auto-Standby
• AUTO-STANDBY Caution: This function is extremely convenient when conducting relay recording, relay If recording is started after using the auto standby function with a recorded tape, the sound playback, twin recording or tape copying. of the previous recording may not be completely erased. In such cases, rewind the tape •... -
Page 12: Dubbing
DUBBING (from deck A to deck B) • Switch on the amplifier or receiver. • Set the Tape Monitor switch on your amplifier or receiver to the TAPE position. Press the POWER switch to the ON position. To begin normal speed dubbing, press the DUBBING SPEED NORMAL button. The DUB load the cassette tape to be played in deck A and the one to be recorded in deck B. -
Page 13: Deck A/B Select And Memory Stop
DECK A / B SELECT AND MEMORY STOP 1) Operation of the Deck A/B Selector (3) Display Back-up (1) Press the RESET button to reset the counter to "0000". The COUNTER VALUE, DECK A/B, MEMO DIRECTION and DOLBY NR functions are (2) By using the PLAY, FF, or REW functions, the reading of the protected for approximately one month by a memory back-up. -
Page 14: Dolby B And C Noise Reduction System
Therefore, most of the treble range components distorted (4) The system functions whether the Dolby B/C NR system is engaged or not. or lost during recording on conventional cassette decks are more faithfully recorded on the new DENON cassette deck. MAINTENANCE •... -
Page 15: Troubleshooting
3. Are the speakers and amplifier/ receiver functioning correctly? If the tape deck still does not function properly, check the symptom against the list below. If the symptom does not correspond to the check list, please contact your DENON dealer. -
Page 16: Wired Remote Diagram
PLAY and FF, or PLAY and REW buttons at the same time. 6. Pressing a button of the wired remote control box and a button of the main unit, DN-770R, (for combined operations) is not possible.