Canceling A Cycle; Changing A Cycle - KitchenAid KAD-7 Technical Education

CANCELING A CYCLE

Anytime during a cycle press:
The display shows:
The dishwasher starts a two minute drain (if needed.) The wash pump does not operate during this
drain function. Let the dishwasher drain completely. The display turns off after two minutes.
NOTE: If the dishwasher does not need to be drained, the display turns off.
To Stop the Drain
Press Cancel/Drain a second time to stop the drain immediately. Always drain the dishwasher before
starting a new cycle.
To Clear the Indicators
Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

CHANGING A CYCLE

During the first fill of a cycle:
1. Press a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly for the new cycle.
After the first fill of a cycle:
1. Press:
The display shows:
The dishwasher starts a two minute drain (if needed.) Let the dishwasher drain completely. The
display turns off after two minutes.
NOTE: If the dishwasher does not need to be drained, the display turns off.
6
SECTION FIVE
WIRING DIAGRAM
NOTE: Check Strip Circuits for resistance and wattage values.
PTC HEATER
39