InFocus LitePro 720 Quick Start Manual page 53

Hide thumbs Also See for LitePro 720:
Table of Contents

Advertisement

Problem: Image is "noisy" or streaked
Try these steps in this order.
1 Deactivate the screen saver on your computer.
2 Turn
Auto Image
Image" on page 35.
3 Adjust the synchronization and tracking manually to find an
optimal setting. See "Manual Sync" on page 36 and "Manual
Tracking" on page 36.
If you're using an extension cable between the CableWizard
and the projector, make sure it's In Focus-approved.
The problem could be with your computer's graphics board. If
possible, connect a different computer.
Problem: Projected colors don't match the computer or video
player's colors
Adjust the brightness, tint and/or contrast from the Display
menu. Just as there are differences in the displays of different
monitors, there are often differences between the computer
image and the projected image. See "Brightness" on page 27,
"Tint" on page 31 and "Contrast" on page 31.
Problem: Lamp seems to be getting dimmer
The lamp begins to lose brightness when it has been in use for a
long time. Replace the lamp as described in "Replacing the Pro-
jection Lamp" on page 41.
Problem: Lamp shuts off
A minor power surge may cause the lamp to shut off. Turn the
projector off, wait at least 30 seconds, then turn it back on.
Problem: Remote not operating correctly
You might need to replace the batteries. See "Replacing the Bat-
teries in the Remote Control" on page 43.
Make sure you're pointing the remote either at the back or front
of the projector, or at the projection screen.
Make sure the remote is within its operating range of 40 feet.
Downloaded From projector-manual.com Boxlight Manuals
off and then back on again. See "Auto
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Litepro 730

Table of Contents