InFocus LitePro 720 Quick Start Manual page 52

Hide thumbs Also See for LitePro 720:
Table of Contents

Advertisement

T r
o
u
b
48
Downloaded From projector-manual.com Boxlight Manuals
l
e
s
h
o
o
t
Adjust the resolution of your monitor if it's greater than
1024x768 pixels for the 720 or 1280x1024 for the 730. Only these
resolutions at 75 Hz or less will display on the projector.
Problem: Image is out of focus
Turn the projection lens to focus the image.
Make sure the projection screen is at least 4 feet (1.2m) from the
projector.
Check the projection lens to see if it needs cleaning.
Problem: Image and menus are reversed left to right
Rear projection mode is probably turned on. Switch back to for-
ward projection from the Controls menu. The image should
immediately return to forward projection. See "Rear Projec-
tion" on page 38.
Problem: Image and menus are upside down
Ceiling mode is probably turned on. Turn off the mode from
the Controls menu. The image should immediately return to
forward projection. See "Ceiling" on page 38.
Problem: the projector displays vertical lines, "bleeding" or spots
Adjust the brightness. See "Brightness" on page 27.
Check the projection lens to see if it needs cleaning.
Problem: no sound
Press the mute button.
Adjust volume.
Verify audio/input connections.
Adjust audio source.
i
n
g

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Litepro 730

Table of Contents