Samsung SV-DVD1E Service Manual page 5

Precautions
1-3 DVD Deck disassembly and reassembly
1-3-1 Disassembly
1) Remove the power cable.
2) Switch SW3 on Deck PCB to "OFF" before
removing the Flat-Cable.
( Inserted into DVD Main PCB DCN1. See Fig. 1-3)
3) Disassemble the Deck.
4) Disassemble the Deck PCB.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
1-4
1-3-2 Assembly
1) Replace the Pick-up.
2) Assemble the Deck PCB.
3) Reassemble the Deck.
4) Insert Flat-Cable into DVD Main PCB DCN1 and
switch SW3 on Deck PCB to "ON". (See Fig 1-3)
Fig. 1-3
FLAT-CABLE
TO DVD MAIN PCB
(DCN1)
Samsung Electronics