Samsung SV-DVD1E Service Manual page 19

4. VCR Alignment and Adjustments
4-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the VCR Main PCB Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment"
and "NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "SW710 (TEST)" button on Function-Timer PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
4-1-1 Location of adjustment button of remote control
Samsung Electronics
X-Point (Tracking Center)
Adjustment ; "5"
Head Switching
Adjustment ; "SPEED"
NVRAM Option Setting
; "MENU"
STANDBY/ON
TRK- ATR
SHUTTLE
VOLUME
SVHS
MUTE
3D SOUND A.DUB
DVD TV VIEW
REC
MARK
INDEX
Fig. 4-1
OPEN/CLOSE
TRK+
PROG
LAST PR
TV/VCR
VCR
FRAME/STEP
REPEAT
MODE
4-1