Page 2
Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
Page 3
Safety ■ Never carry the product by the power cord. GENERAL SAFETY WARNINGS ■ Never pull by the power cord to disconnect from the power supply. WARNING ■ Keep the power cord away from heat, oil and sharp When using the product, the safety rules must be edges.
Safety – checking for any damage if the trimmer starts to vibrate abnormally Please read the instructions carefully – performing maintenance before starting the machine. ■ Wear protective glasses or goggles. ■ Take care against injury from any device fitted for trimming the filament line length.
Page 5
Safety Maintenance Safety alert Plug in Unplug Information Lock Unlock Wear safety hand gloves Parts or accessories sold separately...
PRODUCT SPECIFICATIONS Model RLT1038 RLT7038 Rated power 1,000 W 700 W Rated voltage 230 V ~ 50 Hz 230 V ~ 50 Hz No-load speed 7,300 /min 7,300 /min Cutting capacity 38 cm 38 cm Cutting line diameter 1,5 mm...
This warranty is valid only in the european union, australia and new zealand. Outside these areas, please contact your authorized ryobi dealer to determine if another warranty applies. AUTHORISED SERVICE CENTRE To find an authorised service centre near you, visit ryobitools.eu.
Conformity assessment method to Annex VI Directive 2000/14/EC Serial number: See product rating label Year of construction: See product rating label Machine: ELECTRIC LINE TRIMMER Type: RLT1038 / RLT7038 December 2011 Techtronic Product Development Ltd. 24/F, CDW Building, 388 Castle Peak Road, Tsuen Wan, Hong Kong...