Table of Contents
Advertisement
2. Slide the door on top of the plug towards the
blades. Figure 2.
3. Carefully remove the fuse from the clips holding
it on the top and bottom. Figure 3.
Warning! Electrical Hazard! Only replace
with a fuse type and rating matching what was
removed from the product. If the product fails a
second time, immediately unplug it and contact our
technical support at 1-888-880-3267.
4. Gently push the fuse back into the pins that will
hold it in place.
Note: If the fuse is not seated properly, the unit
will not function.
5. Slide the door back over the fuse box in the plug.
6. Plug the fan back in and resume use.
OPERATING INSTRUCTIONS
Fan Operation
• Plug cord into any standard
120 volt AC outlet.
• You can operate the appliance
by pressing the buttons on the
control panel.
Functions of the Keys and Symbols
Power Button:
Power
Press the button once, the fan will start at Speed 1 (Low speed). The
LED "1" will light up. Press again to switch the fan off.
61802-01 20140330
1h
2h
3h
4h
Osc(L/R)
Timer
Left/Right
Power
Contol Panel
6
Figure 3.
Osc(U/D) Quiet
1
2
3
Speed
Up/Down
Advertisement
Table of Contents
