Table of Contents
Advertisement
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
Inlet and exhaust systems
Air cleaner - Check
Checking procedure described below is a commonly
used procedure. Some application may be equipped
with different air cleaner.
1. Check the air cleaner indicator for the element
clog.
2. If the element is clogged, the red signal mark is vis-
ible.
3. Immediately clean or replace the air cleaner ele-
ment when the signal turns red.
Note: For cleaning of the air cleaner element, refer to
"Air cleaner element - Clean, Check and Re-
place"
(8-15).
8-14
Reset button
Signal
(red)
Fig. 8-21 Air cleaner - Check
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
