Radio Shack TRS-80 User Manual page 45

Color computer plug 'n power appliance/light controller
Hide thumbs Also See for TRS-80:
Table of Contents

Advertisement

The Wall Switch Module should be installed as per instructions supplied
with it, remembering to switch off the breaker first. Set each Wall
Switch Module to housecode
4.
Pressing this number on the Controller will turn ON and OFF this
Wall Switch Module. Other housecodes and unit codes can be used
when controlling with the Color Computer.
OTHER CONTROLLERS
Your Controller can be used to manually control up to four lights/appli­
ances from the buttons on the Controller and can control more than this
by using the joystick to select
computer. The primary use of the Controller
control your home after having been programmed from the computer
after which it does not have to be connected to the computer.
If your system is expanded beyond four Plug 'n Power modules, you
may find it inconvenient to re-connect the Controller to the computer to
manually control your lights/appliances. You may also wish to control
your modules manually from several locations. For this reason you
may wish to purchase an additional manual controller such as Cat.
#61-2680.
This can be plugged in anywhere in your house and can
control the same modules as your Controller from other locations.
"A",
and a unit code between
NOW
operation when connected to the
however,
1
and
is to automatically
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

26-3142

Table of Contents