GMC 2015 Sierra Owner's Manual page 66

Hide thumbs Also See for 2015 Sierra:
Table of Contents

Advertisement

Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, and adjustable pedals (if
equipped) to the desired driving
positions.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold 1
until two beeps sound.
4. Repeat Steps 1 through 3 for a
second driver using 2.
To save positions to the
button and easy exit features:
1. Adjust the driver seat, adjustable
pedals (if equipped), and the
outside mirrors on some vehicles
to the desired positions for
getting out of the vehicle.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold
until two beeps sound.
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park), press and hold "1," "2," or
to manually recall the previously
stored memory positions. Releasing
"1, "2," or
positions are reached stops the
recall.
If the vehicle is ON and in P (Park),
press and release 1, 2, or
manually recall the previously
stored memory positions. Placing
the ignition in OFF/LOCK before the
stored positions are reached stops
(Exit)
the recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
before the stored
to
Seats and Restraints
If the Auto Memory Recall feature is
enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
Press
on the RKE transmitter
and open the driver door.
Press
on the RKE transmitter
when the driver door is
already open.
See Vehicle Personalization on
page 5-46.
To stop recall movement, press one
of the memory, power mirror or
power seat controls; or press the
adjustable pedal control (if
equipped).
RKE Transmitters are not labeled
with a number. If your memory seat
position is stored to "1" or "2" but
this position is not automatically
recalling, then change the stored
position or switch RKE transmitters
with the other driver.
3-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents