Camera (Rvc) - GMC 2015 Sierra Owner's Manual

Hide thumbs Also See for 2015 Sierra:
Table of Contents

Advertisement

The instrument cluster may have a
parking assist display with bars that
show distance to object and object
location information for RPA, and on
some vehicles, for FPA. As the
object gets closer, more bars light
up and the bars change color from
yellow to amber to red.
When an object is first detected in
the rear, one beep will be heard
from the rear, or both sides of the
Safety Alert Seat will pulse two
times. When an object is very close
(<0.6 m (2 ft) in the vehicle rear,
or <0.3 m (1 ft) in the vehicle front),
a continuous beep will sound from
the front or rear, or both sides of the
Safety Alert Seat will pulse five
times. Beeps for FPA are higher
pitched than for RPA.
Turning the Features On or Off
The
button on the center stack
is used to turn on or off the Front
and Rear Parking Assist. The
indicator light in the button comes
on when the features are on and
turns off when the features have
been disabled.
Front and Rear Parking Assist can
be turned off, on, or on with towbar
through vehicle personalization. See
Park Assist under Vehicle
Personalization on page 5-46. If the
parking assist is turned off through
vehicle personalization, the parking
assist button on the center stack will
Driving and Operating
be disabled. To turn the parking
assist on again, select On in the
vehicle personalization menu. The
On with Towbar setting allows for
the parking assist to work properly
with a small item attached to the
trailer hitch. Turn off parking assist
when towing a trailer.
To turn the rear parking assist
symbols or guidance lines, see
Rear Camera under Vehicle
Personalization on page 5-46.
Disconnecting the Rear Vision

Camera (RVC)

The RVC must be disconnected if
the tailgate needs to be removed.
The RVC is disconnected by
removing the connector from the
electrical junction block mounted
on the left side of the cross member
of the vehicle frame. After
disconnecting, the cap mounted
next to the camera connector must
be relocated so that the open
terminals on the junction block
are covered.
9-59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents