JVC XV-N420B Service Manual page 14

3.3 Traverse mechanism assembly
3.3.1 Removing the pickup (See Figure 6, Figure 7)
• Prior to the following procedure, remove the traverse mecha-
nism assembly.
(1) Remove one screw C attaching the plate.
(2) Remove the plate and the leaf spring.
(3) Lift d of the shaft 1, and pull out the shaft 1 from e.
(4) Remove f of the pickup from the shaft 2.
Attaching the pickup:
(1) Engage f of the pickup to the shaft 2.
(2) A spring is lifted and shaft 1 is inserted in the e, and at-
tach the shaft 1 to d.
(3) Attach the leaf spring, and then attach the plate. Fix the
leaf spring and the plate by using the screw C.
1-14 (No.YD054)
spring
Leaf spring
Fig.6
Shaft 2
Part e
spring
Shaft 1
Fig.7
C
Plate
Part f
Part d