Sony PXW-X180 Operating Manual page 85

System
Menu items Sub items and setting values Contents
Clock Set
Time Zone
UTC –12:00 Kwajalein to UTC
Settings for the
+14:00
built-in clock
Date Mode
YYMMDD / MMDDYY /
DDMMYY
12H/24H
12H / 24H
Date
Time
Country NTSC/PAL Area
Setting for the
region
Hours Meter Hours(System)
Display for the
Hours(Reset)
hours meter
Reset
Execute / Cancel
Basic User Name
(admin)
Authentication
(PXW-X180 only)
Password
Settings for basic
(pxw-x180)
authentication of
the network
Wi-Fi
NFC
Execute / Cancel
(PXW-X180 only)
Settings for
wireless LAN
connection and
respective display
Setting
items
Access Point / Station / Off
Channel
Auto / CH1 / CH2 / CH3 /
CH4 / CH5 / CH6 / CH7 /
CH8 / CH9 / CH10 / CH11 /
CH12 / CH13
SSID & Password
WPS
Execute / Cancel
IP Address
Subnet Mask
MAC Address
Regenerate Password
Execute / Cancel
Sets the time-zone difference from UTC in steps of 30
minutes.
Selects the display mode of the date.
YYMMDD: In year, month, day
MMDDYY: In month, day, year
DDMMYY: In day, month, year
Selects the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Sets the current date.
SET: Sets the date.
Sets the current time.
SET: Sets the time.
Sets the region in which you use the camcorder.
Execute: Execute this function.
Displays the non-resettable accumulated time of use.
Displays the resettable accumulated time of use.
Resets the "Hours(Reset)" value to 0.
Execute: Execute resetting.
Sets a desired user name (1 to 16 alphanumeric characters).
SET: Sets the user name.
Sets the password (1 to 16 alphanumeric characters).
SET: Execute this function.
Selects whether to enable the NFC function or not. When
"Execute" is selected, the NFC function turns on and
"Setting" is set to "Access Point" temporarily, and the
camcorder goes into standby mode for NFC. When "Cancel"
is selected, settings return to the previous settings.
Sets the operation mode of the wireless LAN connection.
Sets the wireless LAN channel.
Displays the SSID and password.
Starts Wi-Fi Protected Setup (WPS).
Displays the IP address of the camcorder.
Displays the subnet mask of the camcorder.
Displays the MAC address of the wireless LAN module of the
camcorder.
Regenerates the password.
Execute: Executes this function.
Setup Menu List 85