Network - Samsung SMARTCAM SNH-E6440BN User Manual

❖ Firmware update
If the currently used S/W is not of the latest version, update it.
If you are using the latest version, then the firmware will not be activated.
1) Click <Firmware>.
2) Click the < > icon to update the firmware.
3) When the firmware update is finished, the camera will reboot.
`
n
If you want to update the firmware, it is recommended to use a wired network
connection.
`
If the power goes off during updates, it may not operate properly.
`
The duration of the firmware update depends on the size of the firmware file and the
network connection speed.
`
J
Do not disconnect the camera from power or the Internet during a firmware update, as
this may damage the system.

Network

<Wired Network>
Item
If you select <Dynamic IP Address>, the IP address will be obtained
a
Dynamic IP Address
automatically.
You must manually provide the information of: IP address, subnet
b
Static IP Address
mask, gateway, DNS server address.
a
b
Description
21
03