Panasonic DMR-EX95VEBS Operating Instructions Manual page 75

Picture and sound settings
Option
Play
Repeat Play
Option
Picture
Playback NR
Progressive
Transfer
Copy NR
Sound Option
DVB Multi Audio
V.S.S.
Dialog Enhancer
Other Option
Position
Setting
[On] [Off]
The function is only available if the elapsed time is displayed.
CD VCD
Track
RAM -R
Title
DVD-A MP3
Track
During playback of a playlist
PL (Playlists)
If the Video-CD has playback control, select a track in STOP mode
with the number buttons.
Setting
[On] [Off]
Reduces screen interference.
[On] [Off]
Select [On] to activate full picture output.
[Progressive - On]
Select the appropriate conversion method for full-picture output.
PAL output signal
[Auto] Film and video content is detected and converted appropriately.
[Video] If problems occur with the [Auto] setting.
[Film] Select Video or Film if the video content is is not displayed correct
NTSC output signal
[Auto 1] Film and video content is detected and converted appropriately.
[Auto 2] Movies with different picture frequencies are converted
[Video]
Reduces noise during tape recording.
[Automatic]
Only with picture input from a video cassette.
[On]
Noise reduction is activated for video input.
[Off]
The input signal can be recorded unchanged.
Setting
[Other 1]
If more than one audio channel is broadcast, you can set the desired
[Other 2]
channel here (only applies to digital channels).
RAM -R
[Natural]
Surround sound effect with 2 front speakers. Only with Dolby Digital with
[Emphasis]
2 or more channels. Switch off V.S.S. if this causes problems. V.S.S. does
[Off]
not work with recordings in dual-channel sound.
RAM -R
[On] [Off] Dolby Digital, only with 3 or more channels, including a center channel.
The volume is increased so that dialogue is easier to understand.
Setting
[1 - 5]
Position of the OSD displays on the screen.
All Off
-R DL -RW(V) +R +R DL +RW
DVD-V
Chapter Off
Group Off
Off
with the Auto setting.
If content does not display correct with the [Auto 1] or [Auto 2]
settings.
-R DL -RW(V) +R +R DL +RW DVD-A DVD-V
-RW(V) +R +R DL +RW DVD-A DVD-V
-R DL
DVD
-RW(VR)
HDD
RAM -RW(VR)
HDD
Only for AV1, AV2, AV3 or DV.
-RW(VR) HDD
-RW(VR) HDD
HDD
75