Hitachi 42HDT52 Operating Manual page 66

TV Guide On Screen
CHANGE DEFAULT OPTIONS:
Use this option to change default settings:
• General Defaults
• Record Defaults
• Remind Defaults
• IR Defaults
GENERAL DEFAULT OPTIONS
1. From the SETUP screen, use the CURSOR PAD
or to highlight Change Default Options and then
press the SELECT button
2. Use the CURSOR PAD
Default Options, and then press the MENU button
to access the General Default Options Panel Menu.
3. Enter your choices in the Panel Menu fields:
• BOX SIZE: The initial Info box size ( No,
Small -default, Large, and Last Used )
• BOX CYCLE: The Info Box size rotation when
the INFO button is pressed. (No Only, Small
Only, Large Only, No and Small, No and Large,
Small and Large, and All –default).
• AUTO GUIDE: Automatic access into the TV
Guide On Screen system when the TV is turned
ON (On and Off).
4. Press the SELECT button to highlight Done, and
then press the SELECT button again to exit the
menu or use the CURSOR PAD
Cancel. Then press the SELECT button to exit the
menu.
66
RECORD DEFAULTS
1. From the SETUP screen, use the CURSOR PAD
2. Use the CURSOR PAD
3. Enter the chosen information in the Panel Menu
or to highlight General
4. Press the SELECT button to highlight Done, and
REMIND DEFAULTS
1. From the SETUP screen, use the CURSOR PAD
2. Use the CURSOR PAD
3. Enter the chosen information in the Panel Menu
or to highlight
4. Press the SELECT button to highlight Done, and
to highlight Change Default Options and then press
the SELECT button.
or
defaults and then press the MENU button to
access the Record Defaults Panel Menu.
fields (Start Time, End Time, recorder choice, how
long to keep a Record event, the quality of the
recording).
then press the SELECT button to exit the menu or
use the CURSOR PAD to highlight Cancel. Then
press the SELECT button to exit the menu.
to highlight Change Default Options and then press
the SELECT button.
or
defaults and then press the MENU button to
access the Remind Defaults Panel Menu.
fields (Power On TV, auto-tune, when to display the
Remind screen).
then press the SELECT button to exit the menu or
use the CURSOR PAD to highlight Cancel. Then
press the SELECT button to exit the menu.
to highlight Record
to highlight Remind