Hitachi 42HDT52 Operating Manual page 65

TV Guide On Screen
CHANGE SYSTEM SETTINGS:
Use this option if you want to change something after
completing initial TV Guide On Screen system setup.
1. From the SETUP screen, use the CURSOR PAD
to highlight Change system settings, and then
press the SELECT button to reconfirm your
settings.
2. Use the CURSOR PAD or
selected options, and then press the SELECT
button. Follow the On Screen instructions.
CHANGE CHANNEL DISPLAY:
Use this option to edit channel information that appears
in the LISTINGS Service screen. The 4 channel
information that can be edited are the following:
• Change the position order channels appear in the
LISTINGS Service screen.
• Change the tune channel number.
• Change a channel to one of the following settings:
- ON (Channel is displayed in LISTINGS)
- OFF (Channel is not displayed in LISTINGS)
- AUTO-HIDE (Channel is displayed in LISTINGS
only when program information is available
• Change the service type for the source:
- Cable
- Cable Box
- Over-the-Air
- Antenna
- Etc.
1. From the SETUP Screen, Use the CURSOR PAD
to highlight Change Channel Display, and then
press the SELECT button
2. Press the SELECT button again to access the Grid
Options Panel Menu.
3. Use the CURSOR PAD
the options, and then press the SELECT button .
4. Follow the On Screen instructions.
to highlight your
NOTE: The Tune channel is the channel on which the
or to highlight one of
TV receives a station depending on its type of
cable / satellite service.
65