PPP IP extension: The IP addresses of all packets including
management packets that egress WAN port will be converted to
the WAN port's IP address once this feature is enabled.
Enable PPP Debug Mode: This feature can be enabled only
when supported by your ISP.
Bridge PPPoE Frames Between WAN and Local Ports:PPPoE
dialup frame initiated by LAN port will directly egress WAN port
without being modified if this feature is enabled.
Multicast Proxy: Router enables multicast proxy server if this
feature is enabled.
Enter the PPP user name and PPP Password provided by your ISP. For
other options, keep the default values if you are not clear about them,
and then click the "Next" button to display the following screen (page 4):
This page allows you to configure the gateway address for WAN
connection. We recommend you to keep the default values and click
the "Next" button on page 4 to enter the following page (page 5):
Page 4
- 37 -
ADSL2/2+ Router