Checking Printer Settings - Lexmark Z51 User Manual

2
Squeeze the release tab and the media guide together and slide
the media guide to the edge of the paper.
Release tab

Checking printer settings

If you are using plain, letter-sized paper, and you want normal print
quality and speed, all you need to do is print the document.
To check your printer settings before sending a job to print:
1
From your application's File menu, select
Note: In some applications this might be called
2
Click the
notebook appears.
18
Chapter 3
Destination or Print Setup. Refer to your
application's user documentation for more specific
information about how to specify or change printer
setup options.
Job Properties push button. The Job Properties
Media guide
Printer Setup.
Print
Quick Fix
Paper jams
1 Press the Power button
to turn the printer off.
2 Pull firmly on the
paper to remove it. If
you cannot reach the
paper because it is too
far into the printer,
raise the front cover
and pull the paper out
from the front of the
printer.
3 Close the front cover.
4 Press the Power button
to turn your printer on.
5 Resend your
document.
Tip
• When you change the
printer settings from
your application, the
settings apply only to
that document. To
make your changes
apply to all
documents, see
"Using the Printer
Properties" on page 8.
• Select Quick Print
600dpi to print
quickly or High
1200dpi for the best
print quality.