Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is
set to TV.
1. Use Mode: Selecting Store Demo or Home Use
Press the ▲ or ▼ button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail
environments.
✎
When pressing TV controller, the function menu screen
appears. Select the Menu(m) and press it more than 5
seconds using the controller. The Store Demo mode is
set. Cancel the Store Demo by selecting Source(
pressing it more than 5 seconds.
✎
Store Demo is only for shop display. If you select it,
several functions are not able to use. Please select Home
Use when you watch at home.
2. Network Settings: Configure network settings.
(Australia and New Zealand)
1 Connect Samsung Wireless Lan Adaptor. Select the Next
button, then press the ENTERE button.
✎
If you select the Skip button, you have to set network in
the Network Settings respectively. For more information,
refer to "Connecting to the Network" in the e-Manual.
2
Complete the network settings in accordance with your
desired way.
3. Country (Depending on the country): Selecting a
country
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎
After selecting the country in the country menu, some
models may proceed with an additional option to setup
the pin number.
4. Auto Tuning (Step 1): Selecting how you watch your
TV
• I use an aerial cable.: Memorises all of the available
channels using RF cable.
• I use a cable or satellite service.: You don't need to use
Auto Tuning to find channels.
5. Auto Tuning (Step 2): Selecting a search options
Select the desired broadcasting signal. Press the ◄/► button,
then press the ENTERE button.
✎
When selecting Digital & Analogue, Digital and
Analogue.For more information, refer to Channel →
Auto Tuning.
✎
Press the ENTERE button at any time to interrupt the
memorisation process.
6. Clock: Setting the Clock Mode
Set the Clock Mode automatically or manually.
) and
Auto: Select the time zone where you are located. (Australia
only)
Manual: Allows you to manually set the current date and time.
7. Setup Complete
Press the ENTERE button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN
number. The default PIN number is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Setup
although you did in shop.
✎
If you forget the PIN code, press the remote control
buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0":
POWER
(on)
English - 5
→ System) again at home
(MENU
→ 8 → 2 → 4 →
MUTE