Removing And Installing The Bezel Assembly - IBM BladeCenter T 8720 Installation And User Manual

Removing and installing the bezel assembly

The BladeCenter T unit comes with a bezel assembly containing a removable and
replaceable air filter. There are software features in the management-module that
detect a clogged filter and generate system alerts based on the severity of the
airflow reduction. The typical service interval for the filter is approximately three to
six months depending on your environment.
See the BladeCenter T Types 8720 and 8730 Hardware Maintenance Manual and
Troubleshooting Guide for information for servicing and replacing the filter.
27
Chapter 3. Removing and installing BladeCenter T modules and options