Using Your Bluetooth® Remote To Handle Phone Calls - Sony BRH10 User Manual

Using your Bluetooth® Remote to handle phone calls
Use your Bluetooth® Remote to handle incoming calls, for example, to answer or
reject a call. You can switch the sound from the call handling device to the speaker of
your Bluetooth® Remote during a call.
To turn on the call handling function
1
Make sure that the Bluetooth® Remote is connected to your Android™ device.
2
To open the BRH10 application, go to the Application menu of your Android™
device, then find and tap Smart Connect > BRH10.
3 Tap Edit settings.
4 Drag the slider beside Call Handling to the right to turn on the call handling
function.
You can also open the BRH10 application from the notification panel of your Android™
device.
To activate the HD Voice function
•
In the BRH10 application, tap Call Handling and mark the HD Voice checkbox.
You can also open the BRH10 application from the notification panel of your Android™
device.
To answer a call with the Bluetooth® Remote
•
When you hear an incoming call signal, press the Call key.
The call key and call handling functions become inactive when you try to handle VoIP (Voice-
over-Internet Protocol) calls using the BRH10 accessory.
To end a call
•
During an ongoing call, press the Call key.
To reject a call
•
When you hear an incoming call signal, press and hold down the Call key.
To answer a second call
•
When you hear an incoming call signal during an ongoing call, press the Call
key. The ongoing call is put on hold.
To reject a second call
•
When you hear an incoming call signal during an ongoing call, press and hold
down the Call key.
To switch the sound to the loudspeaker of your Bluetooth® Remote
•
During a call, press the Switch key.
To switch the sound back to the ear speaker of your Bluetooth® Remote, press the Switch
key again.
To mute the microphone during a call
•
Press and hold down the Call key and the volume down key simultaneously
until you hear a clicking sound.
When the microphone is muted, press and hold down the Call key and the volume down key
again to activate the microphone.
To make a voice call
1
Press and hold down the Call key.
2
After the notification tone, speak to enter the contact name or phone number.
This is an Internet version of this publication. © Print only for private use.
10