Installation and First-Time Operation
Office KBM expansion keypad (option)
You can connect one Office KBM expansion keypad with 20 configurable keys to your phone. Each
key has an LED for visual signalling.
I Connecting the Office KBM expansion keypad
Note:
Always disconnect the phone from the mains first before you connect/disconnect an expansion keypad
Office KBM.
• Unplug the phone cord from the socket on the underside of the phone.
• Attach Office KBM expansion keypad to the right of the phone until you feel and hear it snap
into place, as indicated in the installation instructions.
• Plug the cord into the supplementary equipment sockets on the underside of the phone
and the Office KBM expansion keypad.
• Feed the connecting cable through the strain relief on the underside of the Office KBM
expansion keypad.
• Plug the phone cord back into the socket on the underside of the phone. The Office KBM
expansion keypad is now ready for operation.
• If required, connect the power supply to the mains.
Note:
To find out how to label the configurable keys, refer to the Chapter
80
"Labelling Configurable Keys",
81.