Office Kbm Expansion Keypad (Option) - Aastra Office 80IP A150 User Manual

Installation and First-Time Operation

Office KBM expansion keypad (option)

You can connect up to three Office KBM expansion keypads with 20 configurable keys each to your
phone. Each key has an LED for visual signalling.
Connecting the Office KBM expansion keypad
Note:
Always disconnect the phone from the mains first before you connect/disconnect an expansion keypad
Office KBM.
• Unplug the phone cord from the socket on the underside of the phone.
• Attach Office KBM expansion keypad to the right of the phone until you feel and hear it snap
into place, as indicated in the installation instructions.
• Plug the cord into the supplementary equipment sockets on the underside of the phone
and the Office KBM expansion keypad.
• Feed the connecting cable through the strain relief on the underside of the Office KBM
expansion keypad.
• Plug the phone cord back into the socket on the underside of the phone. The Office KBM
expansion keypad is now ready for operation.
• If required, connect the power supply to the mains.
Note:
To find out how to label the configurable keys, refer to the Chapter
80
"Labelling Configurable Keys", 81.