Miele CVA 6800 Operating And Installation Instructions page 74

Problem solving guide
Problem
The container
being used is not
recognised by the
automatic spout
adjustment
function
repeatedly. The
central spout
moves to the rim
of the container
and triggers the
cup protection
cut-out.
The cup
protection cut-out
is not working.
The central spout
moves to the rim
of the container
and becomes
wedged against
the cleaning
container or the
cup or glass.
74
Possible cause and remedy
Use other containers which can be recognised by the auto-
matic spout adjustment function.
There is a fault with the automatic spout adjustment.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. 2 minutes and then switch it back on
again.
^ Use another cup or glass and make a drink.
If the cup protection cut-out is triggered again or the central
spout moves to the rim of the cup or glass again, contact
Miele.
If the cleaning container is very close to or touching the rear
panel, the automatic spout adjustment will not detect it
properly.
^ Move the cleaning container slightly further forward.