Specifications - Sony HT-SL70 Operating Instructions Manual

Specifications

Amplifier section
POWER OUTPUT
Models of area code CEL,CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
SP, CEL, CEK
Frequency response
TV/SAT, DVD, VIDEO: 10 Hz – 50 kHz
Inputs (Analog)
TV/SAT, DVD, VIDEO: Sensitivity: 250 mV
3) INPUT SHORT (with sound field and tone by
passed).
4) Weighted network, input level.
GB
40
2)
25 W + 25 W
2)
FRONT 1) : 35 W/ch
1)
CENTER : 35 W
1)
SURR : 35 W/ch
2)
20 W + 20 W
2)
1)
FRONT : 30 W/ch
CENTER 1) : 30 W
1)
SURR : 30 W/ch
Power requirements
230 V AC, 50 Hz
+0.5/–3 dB (with sound
field and tone by passed)
Impedance: 50 kilohms
S/N 3) : 96 dB
(A, 250 mV 4) )
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD, TV/SAT (Optical) Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Tone
Gain levels: ±6 dB, 1 dB step
Video section
Inputs
Video: 1 Vp-p, 75 ohms
Outputs
Video: 1 Vp-p, 75 ohms
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75
ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
HT-SL55 4-247-583-14(1) GB