License Plate Lamp
To replace one of these bulbs:
1. Unclip the license plate lamp
from the fascia opening.
2. Pull the license plate lamp down
through the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the lamp
socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the fascia
opening until the clip is in place.
Replacement Bulbs
Exterior Lamp
Front Parking and
Turn Signal Lamp
(Except ZL1)
Front Park and Turn
Signal Lamp (ZL1)
Low-Beam
Headlamp
High-Beam
Headlamp
License Plate Lamp
Rear Stoplamps
Rear Taillamp
Vehicle Care
Exterior Lamp
Rear Turn
Signal Lamp
For replacement bulbs not listed
here, contact your dealer.
Bulb
Number
T20
3457NAK
H11LL
H9LL
W5WLL
T20
7444LL
10-47
Bulb
Number
W21/5W