Sharp LC-19DV27UT Operation Manual page 11

QUICK REFERENCE
If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.
1 Open the battery cover. 2 Insert two "AA" size batteries
(supplied with the product).
3
Close the battery cover.
o
Place the batteries with their terminals
corresponding to the (+) and
H
indications in the battery compartment.
Bmm
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
o
Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
o
Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
o
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
o
If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Remote control
sensor
®-10
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the
power on.
POWER
~OlSf'!.J,~rvIDVO
EJECT
~
S?e",S2.
~
0 0 0
CD®®f1
0®@lj
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.