Daewoo FRS-U20DD. Service Manual page 41

8-7. Ice Maker
1) Disassembling Procedure
NO DISASSEMBLING PROCEDURE
1
Remove 2 screws on top front of ice maker.
2
Pull forward ice maker.
3
Unscrew Fixture of Frame Ice Maker.
4
Separate Ice Maker Assembly from
Frame Ice Maker.
5
Separate Cover I/M (A) from Cover I/M (B)
with a (-) screw driver.
Follow the reverse order when assembling.
NO DISASSEMBLING PROCEDURE
6
Level
switch
Remove full ice sensing switch and level switch.
7
Unscrew (3 points) Plate Gear Fixture.
8
Check if ice dropping motor is normal.
9
Remove 2 pin housing (ice sensor)
10
Remove I-sensor (ice sensor) from
Case Icing assembly.
41
Full ice
sensing
switch
Ice dropping
motor