Canon WUX450 User Manual page 191

Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer
to "Displaying the Network Configuration Screen" (P181). For information about
PJLink, refer to "What is PJLink?" (P176).
Item
PJLink
PJLink authentication
Password
Confirm password
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron Controller]
From [Crestron Controller] in the settings screen, you can set parameters for
communication via controllers manufactured by Crestron Electronics.
Completing Computer Settings
Explanation
Turn the PJLink function on or off. If
OFF is selected, the PJLink function
will be turned off and the other settings
in this screen cannot be changed.
Select whether to turn the PJLink
authentication function on or off. If OFF
is selected, [Password] and [Confirm
password] cannot be changed.
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
For confirmation, enter the same
password that you entered in
[Password].
191
Factory default
setting
ON
ON
system
system