Controlling General Audio; Equalizer Control - Kenwood DNX892 Instruction Manual

Return to the Top page
Controlling Audio

Controlling General Audio

1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Audio Control].
4
Set each item as follows.
Fader #/Balance #
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to "None".
Speaker setup (P.107).
See
110 110
<MENU> button/
Bass Boost
Sets the amount of bass boost among "OFF"/
"Level1"/ "Level2"/ "Level3".
* If you have increased the volume first, then
reduced the volume using the "Volume
Offset", the sound generated if you
suddenly switch to another source may be
extremely loud.

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Equalizer].
Equalizer screen appears.
<MENU> button/