Connecting The Units; Connection Diagram - Pioneer KEH-P9700REW Service Manual

Connecting the Units

-

Connection Diagram

See the section "DFS Alarm
Installation".
Yellow/black
If you use a cellular telephone, connect it via
the Audio Mute lead on the cellular telephone.
If not, keep the Audio Mute lead free of any
connections.
Orange
To terminal always supplied with power
regardless of ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Yellow
To light switch terminal.
Black (ground)
To vehicle (metal) body.
Left speaker
Green
+
PRO: Middle
STD: Front
≠
Green/black
Green/red
+
PRO: High
STD: Rear
≠
Black/green
Switch the PRO/STD Switch
Small inverter unit
PRO or STD.
(Refer to "The PRO/STD
Switch".)
This Product
Antenna jack
White/orange
White/red
Brown
White
Fuse holder
Fuse resistor
Fuse resistor
Right speaker
Gray
+
≠
PRO:
Gray/black
When connecting to the speaker leads, do
not connect the RCA outputs.
Gray/red When connecting to the RCA outputs, do
not connect the speaker leads.
+
Do not connect anything to the speaker
≠ leads that are not connected to speakers.
Black/gray
Black label (LOW/SUBWOOFER OUTPUT)
Green label (HIGH/REAR OUTPUT)
White label (MID/FRONT OUTPUT)
IP-BUS cable
Multi-CD player
(sold separately)
To system control terminal of the power
amp or Auto-antenna relay control
terminal.
(Max. 300 mA 12 V DC)
Blue
Blue
Blue
Blue
Left speaker
PRO: Middle
STD: Front
PRO: High
STD: Rear
PRO: Low
STD: Subwoofer
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Right speaker
Use this for connections when
you have the separately
available amplifier.