Selecting An Equalizer Mode From Memory - Eclipse CD8455 Owner's Manual

How to operate the Sound Adjustment Mode

Selecting an equalizer mode from memory

Press a preset button to select the equalizer mode set in memory
for the button. The buttons that set equalizer modes in memory are
called preset buttons.
When the preset value is changed, the display shows as follows:
Buttons [1] to [5]
Turn the [SEL] button to select PEQ.
Press the [SEL] button.
Select any button, from [1] to [5], and press it for
less than two seconds.
The preset pattern stored in memory will be retrieved.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
P
[SOUND] button [SEL] button
1~5 (Preset ch No.)
132
[RTN] button