AOC G2460PG User Manual
  1. Manuals
  2. Brands
  3. AOC Manuals
  4. Monitor
  5. G2460PG
  6. User manual

AOC G2460PG User Manual

Led backlight
Hide thumbs
Table of Contents

Advertisement

Quick Links

s

Advertisement

Table of Contents
loading

Related Manuals for AOC G2460PG

Summary of Contents for AOC G2460PG

  • Page 2: Table Of Contents

    Preset Display Modes ............................47 Plug and Play ..............................49 Regulation ................................50 FCC Notice ..............................50 WEEE Declaration ............................51 Service ..................................52 EU WARRANTY FOR AOC MONITORS ......................52 Warranty Statement for North & South America (excluding Brazil) ............54...

  • Page 3: Safety

    Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.

  • Page 4: Power

    Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.

  • Page 5: Installation

    Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.

  • Page 6: Cleaning

    Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.

  • Page 7: Other

    Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.

  • Page 8: Setup

    CD Manual Stand Wire holder Power Cable USB Cable Not all signal cables (Audio,Analog, DVI, DP, USB and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

  • Page 9: Setup Stand & Base

    Setup Stand & Base Please setup or remove the base following the steps as below. Setup: Remove:...

  • Page 10: Adjusting Viewing Angle

    Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -5°...

  • Page 11: Connecting The Monitor

    Connecting the Monitor Cable Connections In Back of Monitor and Computer: USB2.0 + fast charging USB2.0 USB3.0 USB input Display port DC Power To protect equipment, always turn off the PC and LCD monitor before connecting. Connect the power cable to the AC port on the back of the monitor. Connect one end of the DP cable to the back of the monitor and connect the other end to the computer’s DP port.

  • Page 12: System Requirement

    System requirement 1. G-system function: Compatible Graphics Card: GeForce GTX 650 Ti Boost or higher (for a list of compatible graphics cards, please visit www.nvidia.com/G-sync) Driver: GeForce 331.58 or higer OS: Windows 7/8/8.1 2. 3D function: The G-Sync monitor is NVIDIA 3D Vision Ready monitor. To enable 3D function, NVIDIA 3D version kit is required. NVIDIA 3D version kit requirement for stereoscopic 3D experience for a list of compatible graphics cards, please visit www.nvidia.com/3DVisionG-sync...

  • Page 13: Wall Mounting

    Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC.

  • Page 14: Adjusting

    Adjusting Setting Optimal Resolution Windows Vista For Windows Vista: 1 Click START. 2 Click CONTROL PANEL. 3 Click Appearance and Personalization. 4 Click Personalization...
  • Page 15 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution.

  • Page 16: Windows Xp

    Windows XP For Windows XP: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Click Appearance and Themes. 5 Double click DISPLAY.

  • Page 17: Windows Me/2000

    6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution. Windows ME/2000 For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution.

  • Page 18: Windows 8

    Windows 8 For Windows 8: Right click and click All apps at the bottom-right of the screen. Set the “View by” to “Category”. Click Appearance and Personalization.
  • Page 19 Click DISPLAY. Set the resolution SLIDE-BAR to 1920x1080.

  • Page 20: Hotkeys

    Hotkeys (Dialpoint OFF\ON) / Exit Dialpoint selection menu / < ULMB / > Menu / Enter Power （Dialpoint Off\On） / Exit When the OSD is closed, press （Dialpoint OFF\ON） button will be on or off Dialpoint type. When the OSD is not closed，press Exit button to save user data.

  • Page 21: Osd Setting

    OSD Setting Basic and simple instruction on the control keys. Press the MENU-button to activate the OSD window. Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it . press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.

  • Page 22: Luminance (3D Function Disable)

    Luminance (3D function disable) Luminance (3D function enable) Luminance Contrast Color Setup NVIDIA LightBoost Gamma Gamma 1 OSD Setup Overdrive Extra Press (Menu) to display menu. Press < or > to select (Luminance), and press to enter. Press < or > to select submenu, and press to enter.
  • Page 23 Backlight Adjustment Recall Each step will Brightness 0-100 Brightness increase / Value 90 decrease value by 1 Contrast from Recall Digital-register. Each step will Luminance increase / Contrast 0-100 Contrast decrease value by 1 Value 50 Gamma1 (2.2) Gamma Gamma Gamma2 (2.0) Adjustment Recall...

  • Page 24: Color Setup

    Color Setup Press (Menu) to display menu. Press < or > to select (Color Setup), and press to enter. Press < or > to select submenu, and press to enter. Press < or > to adjust. Press to exit Recall Warm Color Warm Temperature from (6500K)
  • Page 25 Red gain from Digital-register. 0-100 The User Each step will increase R/G/B / decrease value by 1 value(default Green Green gain from 0-100 is 50) will Digital-register. not be Each step will increase modified by / decrease value by 1 reset Blue gain from function in...

  • Page 26: Osd Setup

    OSD Setup Press (Menu) to display menu. Press < or > to select (OSD Setup), and press to enter. Press < or > to select submenu, and press to enter. Press < or > to adjust. Press to exit English No need Français to recall...
  • Page 27 Adjust the OSD timeout. Recall 10 Timeout 5-120 Value Each step will increase / decrease value by 5 Adjust the horizontal position of the OSD. Recall H. Position 0-100 Each step will increase / 100 Value decrease value by 25 Adjust the vertical position of the OSD.

  • Page 28: Extra

    Extra Press (Menu) to display menu. Press < or > to select (Extra), and press to enter. Press < or > to select submenu, and press to enter. Press < or > to adjust. Press to exit...
  • Page 29 Clear each old status of Auto-configuration and set the color temperature to Warm Reset Do not execute reset, return to main menu. Extra G_sync function disable and timing V freq >=85hz ULMB G_sync function enable or display card do not support G_sync function Note ：...

  • Page 30: Led Indicator

    LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red...

  • Page 31: Driver

    Driver Monitor Driver Windows 8 Start Windows® 8 Right click and click All apps at the bottom-right of the screen. Click on the “Control panel” icon Set the “View by” to “Large icons” or “Small icons”.
  • Page 32 Click on the “Display” icon. Click on the “Change display settings” button. “ Click the Advanced Settings” button.
  • Page 33 button Click the “Monitor” tab and then click the “Properties” Click the “Driver” tab. 10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button.
  • Page 34 11. Select "Let me pick from a list of device drivers on my computer". 12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13.

  • Page 35: Windows 7

    Windows 7 1.Start Windows® 7 2.Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon. 4.Ckick on the “Change display settings” button.
  • Page 36 “ Click the Advanced Settings” button. button. Click the “Monitor” tab and then click the “Properties” 7.Click the “Driver” tab.
  • Page 37 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer". 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
  • Page 38 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive. 3. Close all open windows and remove the CD. 14.

  • Page 39: Windows Vista

    Windows Vista 1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".
  • Page 40 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". 5.

  • Page 41: Windows Xp

    Windows XP 1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4. Click on the 'Display' Item.
  • Page 42 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below.
  • Page 43 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10.

  • Page 44: Windows 2000

    Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured.

  • Page 45: Troubleshoot

    Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Press to auto adjust.

  • Page 46: Specification

    Specification General Specification Model name G2460PG Driving system TFT Color LCD Viewable Image Size 61.0 cm diagonal Pixel pitch 0. 27675 mm(H) x 0. 27675 mm(V) Panel Video DP Interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 325.08MHz...

  • Page 47: Preset Display Modes

    Preset Display Modes HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY(kHZ) FREQUENCY(Hz) 1920×1080@60Hz 67.500 60.000 1920×1080@100Hz 113.300 1920×1080@85Hz 96.513 84.884 1920×1080@120Hz 137.260 119.982 1920×1080@144Hz 158.110...
  • Page 48 20-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name ML_Lane 3 (n) ML_Lane 0 (p) ML_Lane 3 (p) CONFIG1 ML_Lane 2 (n) CONFIG2 AUX_CH(p) ML_Lane 2 (p) ML_Lane 1 (n) AUX_CH(n) Hot Plug Detect ML_Lane 1 (p) Return DP_PWR ML_Lane 0 (n) DP_PWR...

  • Page 49: Plug And Play

    Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

  • Page 50: Regulation

    Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 51: Weee Declaration

    WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

  • Page 52: Service

    Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. In the absent of the proof of purchase, the warranty will start 3 months after the date of manufacturing indicated on the product.
  • Page 53 All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE.

  • Page 54: Warranty Statement For North & South America (Excluding Brazil)

    In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of:...
  • Page 55 ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty...

Table of Contents